Wagner Micro Ceramic 500ml
Why does Classic Collective recommend Wagner Micro Ceramic?
Micro Ceramic Oil Additive is a nano-particle solid lubricant that works by coating and separating high pressure surfaces within mechanical assemblies. The main purpose is to reduce friction between the working surfaces to reduce wear and extend service life, but Micro Ceramic brings the significant additional benefits of reduced operating temperatures, reduced noise, increased engine power, smoother operation and reduced emissions. The main benefits include:
- Reduced friction and enhanced performance output
- Reduced fuel and oil consumption
- Reduced engine and transmission mechanical noise, smoother mechanical operation
- Lower running temperatures giving an enhanced service life and mechanical lifespan
- Reduced operational costs and emissions
WAGNER Micro-Ceramic Oil Additive can be used in all standard mineral, synthetic, or semi-synthetic engine and gear oils and is safe for use in engines equipped with turbo chargers and catalytic converters.
Micro-Ceramic lubricants do not interfere or react with standard oil additives. Therefore, it can be used in all engine and gear oils without having any negative impact on the standard oil’s make-up or functionality.
Due to the ceramic spheres size of 0.15 – 0.25 microns, filters do not collect the micro-ceramic particles and do not become blocked. This means Micro-Ceramic will pass through all full flow filters.
- It is NOT for use in automatic, CVT/DSG or vario transmissions, or wet clutches.
- It should not be used in partial flow filters of 1 micron or less nor be used in sub-micron filter systems.
Further spec below:
- 26 Hour Std
- Reduced friction, and enhanced performance output
- Reduced fuel and oil consumption
- Reduced engine and transmission mechanical noise
- Smoother mechanical operation (e.g. gear changes)
- Lower running temperatures
- Enhanced service life and mechanical lifespan
- Reduced operational costs
- Reduced emissions
Micro Ceramic is an oil additive for engines, gearboxes,
differentials and other mechanical assemblies where overall performance,
service life and cost are important factors.
WAGNER Micro-Ceramic Oil Additive can be used in all
standard mineral, synthetic, or semi-synthetic engine and gear oils and is safe
for use in engines equipped with turbo chargers and catalytic converters, wet
clutches and wet brakes.
- NOT for use in automatic, DSG/CVT or vario transmissions, in wet single-disc or multi-plate brakes in agricultural and construction machines, in converter gears of industrial trucks.
- For automatic transmissions, WAGNER ATF Power Mix should be used.
WAGNER Micro-Ceramic Oil Additive contains billions of nano-sized
ceramic spheres that greatly enhance the lubrication capacity of standard
engine oils. The microscopic ceramic spheres adhere to the metal’s porous
surface, smoothing the normally rough surface.
At the same time, the ceramic particles act as Nano ball
bearings, reducing friction and allowing the smooth metal surfaces to freely
glide over one another. This reduced friction also lowers the running
temperature and extends the service lifespan.
Under extreme pressures, the ceramic spheres lose their
shape creating a film, bonded, to the metal surfaces. This ceramic film gives
the metal a durable layer of protection, allowing it to withstand extreme
pressures.
The ceramic-on-ceramic film that is created not only reduces
wear and friction but also reduces engine noise as the components are running
smoother and more efficiently. There is no longer metal gliding on metal, but
rather ceramic gliding on ceramic.
Micro-Ceramic lubricants do not interfere or react with
standard oil additives. Therefore, WAGNER Micro-Ceramic Additives can be used
in all engine and gear oils without having any negative impact on the standard
oil’s make-up or functionality.
Due to the ceramic spheres size of 0.15 – 0.25 microns,
filters do not collect the micro-ceramic particles and do not become blocked.
This means WAGNER Micro-Ceramic will pass through all full flow filters.
WAGNER Micro-Ceramic should not be used in partial flow filters of 1 micron or less nor be used in sub-micron filter systems.
Micro Ceramic additive should make up 10% of the total oil volume.
Therefore 500ml will be enough for 5 litres of oil
- Causes serious eye irritation
- Toxic to aquatic life with long-lasting effects
- Causes skin irritation
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
