Annual Fuel Injection Service

The service schedule

Understand exactly what your specialist classic car engineer will check, adjust, clean, lubricate or replace during the service of your car….

• • Lights check and any blown bulbs replaced
  • Engine Cleaner is added to the old oil, engine ran up to temperature, make sure cooling fans cut in, then engine is switched off
  • Drain hot engine oil
  • Wheels off, tyres checked for condition, age, tread wear and pressures
  • Remove spare wheel and checked for condition, tread ware and pressure
  • Check hubs for wear and condition
  • Check wheel condition
  • Check and clean oil breather
  • Inspect brakes for friction material, leaks, and function
  • Grease all driveshaft joints, hubs and ball joints front and rear
  • Inspect metal brake pipes and flexible pipes for condition/corrosion
  • Check and adjust handbrake as necessary
  • Under body corrosion inspection
  • Exhaust system inspection, general condition and mounts
  • Check gearbox oil for condition and level
  • Check differential oil for condition and level
  • Check and replace inline fuel filter

• • Check/clean or replace air filter(s)
  • Check/change spark plugs
  • Check condition/gap of points and condenser (where fitted)
  • Check condition of rotor arm/cap and HT leads
  • Check and adjust engine timing
  • Check drive belt condition and tension
  • Inspect coolant pipes & gland hole vent hole under water pump for leakage
  • Inspect core plugs for leakage
  • Check coolant strength and top up/replace
  • Check brake/clutch fluid for level and condition
  • Replenish windscreen washer fluid, check operation of screen wash jets
  • Inspect wiper blade condition and check operation, replace wiper blades as required
  • Grease door catches and linkages
  • Renew oil filter & sump washer, replace sump plug (if required) & replenish engine oil
  • Engine start, check for leakage
  • Road test, check heater and fan operation, re-torque wheels, re-check engine oil level